Engineered solution
The standard off-the-shelf boring bar offer represents a good platform for optimized solutions and high productivity. When a tailor made solution is needed, engineered versions of dampened boring bars are available for order.
The engineered dampened boring bars are often tapered, elliptical and/or curved, with the mounting adapted to the machine. Bars with overhangs of up to 14 x BD are available.
Turning-, milling- and boring adapters can be engineered with most of the common back- and front-end couplings.
Back-ends:
- Coromant Capto
- HSK
- MAS BT
- VDI
- VTL
- DIN 2080
- ISO 7388/1
- Cylindrical
Front-ends:
- CoroTurn SL
- CoroTurn SL quick change
- DuoBore
- CoroBore 825
- Arbor
Engineered adapters come with diameters ranging from 10–600 mm (0.394-23.62 inch). For turning adapters, the overhang ratio is up to 14 x BD, while the milling and boring adaptors have overhang ratios up to 10 x BD.
For best performance and highest possible static stiffness in the bar body and a damping system, the tools are are designed for defined applications.
Special solutions for multi-task machine tools
As multi-task machines are equipped with all the necessary tooling when performing a complete machining in one set-up, they have to store both short and long tool holders in the tool magazine, plus all the cutting units needed for performing the complete operations.
A range of long boring bars, with a manual or an automatic front-clamp system is available for the most common machines supplied by Mazak, WFL, Mori-Seiki, Niles–Simmons, Weingärtner, DMG and Okuma.
Ask your yellow coat representative to help you order your engineered solution.
