CoroMill® 690 is developed specifically for high productivity 2D profile milling of titanium components. Inserts are securely fastened by iLock technology. By equipping every insert pocket with threaded coolant holes with nozzles for high pressure coolant delivery, you can apply maximum coolant where required.
Benefits
- High productivity milling of titanium
- ILock interface gives a secure process, increased feed, and longer tool life
Features
- Cutting fluid supply, individual to each insert pocket
- Fully controlled flow and pressure through threaded holes–either for nozzles or plug screws
- Insert and cutter interface shaped for rigid location with iLock
- Unique end and side inserts for optimum performance
Application
- 2D profile milling of titanium
- Edging and full slotting
ISO application area
Recommendations
Insert sizes: 10, 14 mm (0.394, 0.551 inch)
Alignment of inserts ensures straightness within 0.1 mm (0.004 inch) |
Pitch
Coolant supply
During cutting, the chips can be prone to sticking to the cutting edge. This means that the next cutter rotation is re-cutting the chip. By equipping every insert pocket with threaded coolant holes with nozzles for high pressure coolant delivery, you can apply maximum coolant where required.
This effectively eliminates the problem for a constant cutting edge performance. Supplying cutting fluid to all the insert pockets in the long edge cutter requires high pump volumes and pressure capability.
Product range
- Diameter range: 40-100 mm (1.500-4.000 inches)
- Coromant Capto® coupling, HSK, or Arbor mounting
iLock™ interface
Locked-in precision, rigid and stable for a consistent, accurate performance. A key feature of the success of this cutter is its unique iLock interface. The problem with axial cutting forces is the Achilles heel for other long edge cutters, but the design of the CoroMill 690 provides the essential resistance to these forces.
The result is:
- Dependable secure process–reduced insert movement
- Increased feed
- Longer cutter-body life–axial support prevents bottom row breakage and chip jamming on second row
CoroMill® 600
CoroMill 600 is a modern innovative milling cutter–a completely new design based... keyboard_arrow_right
Thrust fittings
The thrust fitting is normally produced in titanium and is located between the wing... keyboard_arrow_right
CoroMill 172
The CoroMill 172 disc cutter offers a versatile and time saving solution for milling... keyboard_arrow_right
Overview
CoroMill 490 gives true 90-degree cuts without sharp steps. It uses four-edge inserts... keyboard_arrow_right
