CoroMill® 690 is developed specifically for high-productivity 2D profile milling of titanium components. Inserts are securely fastened by iLock technology. By equipping every insert pocket with threaded coolant holes with nozzles for high pressure coolant delivery, you can apply maximum coolant where required.
Benefits
- High-productivity milling of titanium
- ILock interface gives a secure process, increased feed and longer tool life
Features
- Cutting fluid supply, individual to each insert pocket
- Fully controlled flow and pressure through threaded holes - either for nozzles or plug screws
- Insert- and cutter interface shaped for rigid location with iLock
- Unique end- and side inserts for optimum performance
Application
- 2D profile milling of titanium
- Edging and full slotting
ISO application area
Recommendations
Insert sizes: 10, 14 mm (0.394, 0.551 inch)
Alignment of inserts ensures straightness within 0.1 mm (0.004 inch) |
Pitch
Coolant supply
During cutting, the chips can be prone to sticking to the cutting edge. This means that the next cutter rotation is re-cutting the chip. By equipping every insert pocket with threaded coolant holes with nozzles for high pressure coolant delivery, you can apply maximum coolant where required.
This effectively eliminates the problem for a constant cutting edge performance. Supplying cutting fluid to all the insert pockets in the long edge cutter requires high pump volumes and pressure capability.
Product range
- Diameter range: 40–100 mm (1.500–4.000 inch)
- Coromant Capto® coupling, HSK or Arbor mounting
iLock™ interface
Locked-in precision, rigid and stable for a consistent, accurate performance. A key feature to the success of this cutter is its unique iLock interface. The problem with axial cutting forces is the Achilles heel for other long edge cutters, but the design of the CoroMill 690 provides the essential resistance to these forces.
The result is:
- Dependable secure process – reduced insert movement
- Increased feed
- Longer cutter-body life - axial support prevents bottom row breakage and chip jamming on second row
ISO S profil işleme için CoroMill® Plura küresel uç
Ne zaman kullanmalı Bliskler ve bıçaklar gibi parçalarda profil işleme (yarı ince... chevron_right
ISO S profil işleme için CoroMill® Plura küresel uçlu
lollipop Ne zaman kullanılır Ulaşılması zor özelliklerin, dip boşaltmalı özelliklerin... chevron_right
The modern approach to turning hip joints with round inserts
Why Round Inserts? Round inserts offer you all the best advantages for the machining... chevron_right
Başarı hikayeleri
Başarı hikayeleri Dünya genelinde karşılaştırma testleri gerçekleştirilmiştir ve... chevron_right
