The CoroMill® 790 cutter is the first choice for ISO N materials. To be used in shoulder operations as a "super remover", it is designed for high security demands and high precision work.
Benefits
- High speed machining performance with high security
- Extreme metal removal rates
- Very small tool run-out
Features
- Open insert location for undisturbed chip flow at heavy cuts
- Serrated interface for precision and security
- Through coolant
Application
- Machining of frame components in aluminium
- Deep cavity machining
- Finishing machining in most materials
ISO application area
Recommendations
Insert sizes and mounting
| 16 mm insert for machines with moderate spindle power | Serrated interface for high security and to reduce effects of insert tolerance on the cutter diameter |
For extremely fine surface finishes, it is recommended to use an extra close pitch cutter. Note that cutters with extra close pitch have recommended maximum ae = 0.5 mm (0.020 inch).
Product range
- Diameter range: 25–100 mm (1.000–5.000 inch)
- Coromant Capto® coupling, cylindrical shank, Arbor, Weldon or HSK mounting
CoroMill 329
Grooving cutter CoroMill 329 adds speed and feed capability to groove milling thanks... chevron_right
CoroMill 690
CoroMill 690 is developed specifically for high-productivity 2D profile milling... chevron_right
CoroMill 볼 노즈 사상 가공
The CoroMill Ball nose finishing cutter is used for finish milling of a range of... chevron_right
CoroMill 495
Most components require at least one chamfer operation. This makes frequent tool... chevron_right
