Most components require at least one chamfer operation. This makes frequent tool changes a potential problem, especially when machining small batches in different materials. With CoroMill 495®, the same tool can perform multiple kinds of chamfering in several materials, ideal for keeping downtime low and machine utilization high.
Benefits
- Versatile tool for many different chamfer operations
- Flexible inserts capable to perform in several workpiece materials
- High machine utilization thanks to few tool changes
Features
- Indexable inserts with four cutting edges
- Grades and geometries with wide-range functionality in several workpiece materials
- Cutter bodies with high number of inserts in relation to body size
Application
- Chamfering of holes and along edges
- Typical operations are chamfers, back chamfers, preparation for welding and deburring
ISO application area
Product range
Cutter bodies
| Cutter diameter | Chamfer angle | Coupling type |
| 12–25 mm | 15°, 30°, 45°, 60° | Cylindrical shank |
| 0.5–1 inch | 15°, 30°, 45°, 60° | Weldon |
| 12–25 mm | 45° | Coromant EH |
| 40–63 mm | 45° | Coromant Capto® |
Inserts
| Insert size | Grade | Geometry | ISO application area |
| 9 | GC1030 | -PM | P, K, N |
| 9 | GC1030 | -MM | M, S |
CoroMill 329
Grooving cutter CoroMill 329 adds speed and feed capability to groove milling thanks... chevron_right
CoroMill 790
The CoroMill 790 cutter is the first choice for ISO N materials. To be used in shoulder... chevron_right
CoroMill 326
Versatile and cost efficient, this miniature milling cutter benefits from three cutting... chevron_right
Product details
Features Inserts with two cutting edges Shank protection inserts on larger diameter... chevron_right
