Versatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236 inch) as a complement to CoroMill 327, CoroMill 328 and CoroMill Plura.
Benefits
- Three cutting edges for productivity
- Chamfering and back-chamfering of holes with one tool
- Very high precision and low cutting forces
- Same tool for different pitches
- One grade for all materials
Features
- Partial thread profiles for flexibility
- Small diameter tools, down to 5.8 mm (0.228 inch)
- Long reach, up to 35 mm (1.378 inch)
Application
- Internal thread milling
- Chamfer milling
- Hole diameters from 6 mm (0.236 inch)
ISO application area
Recommendations
Use with CoroChuck 930 for best stability and precision. Always use with cylindrical collets for CoroChuck 930.
Product Range
Tool diameter mm (inch)
- Internal thread milling tools: 5.8, 7.8 (0.228, 0.307)
- Chamfering tools: 5.8, 7.8 (0.228, 0.307)
CoroMill® 327
A versatile cutter that can be used for many types of grooves, threads and chamfers... chevron_right
CoroMill 329
Grooving cutter CoroMill 329 adds speed and feed capability to groove milling thanks... chevron_right
CoroMill 495
Most components require at least one chamfer operation. This makes frequent tool... chevron_right
CoroThread® 266
CoroThread 266 is designed with an iLock interface to combat the extreme forces placed... chevron_right
