The CoroMill® 210 is a very productive roughing concept to use when high metal removal rate is the first priority. A 10° entering angle allows extreme feed rates when face milling. This directs the cutting forces in an axial direction which provides a stable cutting action and no vibration tendency.
Benefits
- High table feed due to the chip thinning effect – high productivity
- First choice face milling cutter in long overhang machining
- Multipurpose tool. Face milling, boring possibilities, ramping and plunge milling
Features
- Coromant Capto® coupling, cylindrical shank, Arbor, Weldon or CIS Arbor mounting
- Insert geometries and grades for all materials apart from ISO N
- Two insert sizes – 9 and 14 mm
- E-xM geometry for excellent performance in titanium
- Through coolant
News
CoroMill® 210 is now available with steel milling grades GC4330 and GC4340 with Inveio® technology for improved tool life and increased process security.
Application
- High feed face milling
- Long overhang machining
- Roughing with high productivity
- 10° entering angle results in favourable cutting forces directed towards the spindle
- Plunge milling
- When the tool overhang is greater than 4×D
- When the stability is poor
- For semi-finishing in corners
- For difficult-to-cut material such as titanium
- Ramping
- Diameter range: 25–160 mm (1.000–6.000 inch)
ISO application area
Programming
| iC | Dimensions, mm (inch) | Uncut material | ||
| R | b | ap | x | |
| 9 | 2.5 (.098) | 7.05 (.278) | 1.2 (.047) | 0.79 (.031) |
| 14 | 3.5 (.138) | 12.0 (.472) | 2.0 (.079) | 1.48 (.058) |
Helical interpolation
| Cutter dia. | CoroMill® 210 | |||||
| iC 09 | iC 14 | |||||
| Ramping angle (α°) | b | 7 | Ramping angle (α°) | b | 12 | |
| max Dm | flat Dm | max Dm | flat Dm | |||
| 25 | 14.5 | 49 | 34 | |||
| 32 | 8 | 63 | 48 | |||
| 36 | 7 | 71 | 56 | |||
| 42 | 5 | 83 | 68 | |||
| 50 | 3.5 | 99 | 84 | |||
| 52 | 3.3 | 103 | 88 | 5.8 | 103 | 78 |
| 63 | 2.6 | 125 | 110 | 3.8 | 125 | 100 |
| 66 | 2.4 | 131 | 116 | 3.2 | 131 | 106 |
| 80 | 2.4 | 159 | 134 | |||
| 82 | 2.2 |
Product range
Insert
| Dimensions | ap, mm (inch) | ea, mm (inch) |
| 9 | 1.2 (0.047) | 8 (0.315) |
| 14 | 2.0 (0.079) | 13 (0.512) |
Tools
| Diameter | IC | Holding system | Max ap |
| 25-66 mm | 09 | Arbor, cylindrical shank, Coromant Capto, threaded coupling | 1.2 mm |
| 1-2.5 inch | 09 | Arbor, CIS arbor, Coromant Capto, cylindrical shank, Weldon | 0.047 inch |
| 52-160 mm | 14 | Arbor, Coromant Capto, | 2.0 mm |
| 2.0-6.0 inch | 14 | Arbor, Coromant Capto, CIS arbor | 0.079 inch |
CoroMill® 419
CoroMill 419 is a high-feed milling concept with five edges for roughing to semi-finishing.... chevron_right
CoroMill 345
CoroMill 345 is a cost-efficient face mill for high productivity in terms of feed... chevron_right
CoroMill 329
Grooving cutter CoroMill 329 adds speed and feed capability to groove milling thanks... chevron_right
CoroMill Century
CoroMill Century is a face mill tool system with aluminium or steel body for high... chevron_right
