CoroCut® 1-2
Versatile parting and grooving
Versatile parting and grooving
With more than 700 standard inserts, CoroCut® 1-2 covers all parting and grooving applications in most materials, from standardized grooves to parting off and profiling in heat-resistant super alloys.
Cost-efficiency with two edges
The two-edge inserts are firmly positioned in the railed insert seat, providing cost-efficiency and stable performance.
Secure and efficient machining
In grooving, chips easily get stuck in the curved groove, leading to insert breakage. CoroCut® 1-2 tools with precision coolant securely evacuate the chips for an uninterrupted machining process.
Application
- Parting, external grooving, face grooving, internal grooving, profiling and hard part turning
- Roughing to finishing
In parting off and external grooving, CoroCut® 1-2 is a cost-efficient solution for depths in which 2-edged inserts can be used.
Product variants
Tool holding
- Coromant Capto®, VDI and HSK-T for connecting QS shanks and parting blades in turning centers
- QS™ stops for connecting QS shanks and Swiss tools, machine-specific adapters
- Rectangular shanks and boring bars
Plug and play adapters for easy coolant connection
CoroTurn® SL blades
CoroTurn® SL cutting blades enable a wide range of tool combinations from a small inventory of adapters and cutting heads.
Insert geometries
- Parting off: -CF, -CM, -CR, -CS
- Grooving and side turning: -TF, -TM
- Grooving: -GF, -GM, -GR
- Profiling: -RO, -RM, -RE
- Wiper: -CF, -TF
- Hard part turning: -XB
Insert grades
- PVD: GC1105, GC1125, GC1145
- CVD: GC1135, GC4325, S205, CG3115
- CBN: CB7015, CB7025, CB7105 and CB7115
- PCD: CD10
- Ceramic: CC6220
- Uncoated: H13A, H10F
Highlights
Access with angled inserts
Angled inserts are perfectly formed for those difficult-to-access grooves in, e.g., the turbine disc, eliminating the need for special tools.
Hard part turning with CoroCut® 1-2
The new -XB geometry for hard part turning can operate at very high feed rates, up to 1.2 mm/rev (0.047 in/rev) without compromising surface finish.
Seal fin grooving
Generating small radii profiles with correct profile widths puts demands on a robust tooling solution. CoroCut® 1-2 for seal fin grooving is available in insert widths 1.5 and 2 mm (0.059 and 0.079 inch).
Join us. Stay updated.
Sign up for our newsletter today
Sandvik Coromant US - Mebane, NC
+1-800-Sandvik