CoroCut® QD
The most reliable system for parting off
High precision coolant
Over and under coolant system cools the cutting zone for better chip control, extended tool life and higher cutting data. Easy coolant connection with plug and play adaptors.
Grades and geometries for parting off
Geometries designed for good chip formation, high stability and coolant access in combination with grades that provide excellent edge-line security in all materials makes for inserts that excel in every parting off operation.
Y-axis parting
CoroCut® QD for Y-axis parting is designed with the insert pocket rotated 90 degrees, providing more than a six-fold increase in the blade stiffness in turning centers, multi-task machines and sliding head machines with Y-axis.
Application area
- First choice for parting off Diameter: 38–160 mm (1.5–6.3 inch) Cutting widths (CW): 1.0–8.0 mm (0.04–0.315 inch)
- Deep grooves Cutting depth (CDX): 15–80 mm (0.6–3.15 inch) Cutting widths (CW): 2.0–8.0 mm (0.08–0.31 inch)
- Machine types: Turning centers, sliding head machines, multi-spindle machines
Product range
Parting blades
Diameter: Up to 160 mm (6.3 inch)
Cutting widths: 1.0–8.0 mm (0.04–0.315 inch)
Y-axis parting blades
Diameter: Up to 180 mm (7 inch)
Cutting widths (CW): 2–6 mm (0.079–0.236 inch)
CoroTurn® SL cutting heads
CoroTurn SL cutting blades enable a wide range of tool combinations from a small inventory of adaptors and cutting heads.
QS™ shank and Swiss tools
Tools with plug-and-play precision coolant for turning centers and sliding head machines. Regular shank tools also available.
Tool holding
- Tool blocks
- Coromant Capto®
- VDI
- HSK-T
- QS™ stops (sliding head machines)
- Machine-specific adapters
Geometries
Parting off:
-CF, -CH, -CM, -CR, -CO, -CL
Grooving and side turning:
-TF, -TM
Grooving:
-GM
Profiling:
-RM
Wiper inserts:
-CF, -CH, -TF
Grades
PVD:
GC1105, GC1125, GC1225, GC1145
CVD:
GC1135, GC4425, GC4335
Uncoated grade:
H13A
Tailor Made
Tailor Made options:
- Maximum cutting diameter and width
- Functional length and width
- Shank width and height
TailorMade options for inserts:
- Insert width, radius, shape and grade
Y-axis parting: turning re-invented
Get to know Y-axis parting – a completely new way of parting off. While conventional parting off uses feed motion along the X-axis with the cutting force directed through the weakest section of the blade, CoroCut® QD for Y-axis parting is designed with the top face of the insert perpendicular to the blade. This gives a more beneficial direction of the cutting force, resulting in considerably higher stability and reduced vibration.
CoroCut® QD for Y-axis parting is the first choice for parting off in turning centers, multi-task machines and sliding head machines with Y-axis. It can machine large diameters up to 180 mm (7 inch), and is particularly suitable for reaching between the main- and sub-chuck with long overhangs.
Comparison of conventional CoroCut® QD blade and blade for Y-axis parting
Highlights
Demo: Three times higher feed rate with Y-axis parting.
See the Y-axis parting blade in action and compare it to the conventional parting method.
Behind the scenes of Y-axis parting
To truly advance parting off operations, it is not enough to develop a new tool—you need to develop the method for using it. Meet Staffan and Johan, the brains behind the new ingenious way of parting along the Y-axis, which challenges conventional machining.
New steel turning grade
CoroCut® QD with grade GC4425 is specifically optimized to combine wear resistance and reliability for parting off. GC4425 is your first choice for parting off steel when conditions and setup are stable.
Join us. Stay updated.
Sign up for our newsletter today
Sandvik Coromant US - Mebane, NC
+1-800-Sandvik