Sandvik Coromant logo

CBN insert with integral chip breaker

CBN insert with integral chip breaker – Increase productivity with a single cut strategy

Concept description

This CBN insert is for hard-to-soft rough machining automotive components, such as gears, crown wheels, shafts, and all case-hardened components where the hardened layer needs to be removed. Using a single cut strategy, it eliminates the need for multiple cuts, resulting in higher productivity.
The long tip length means that a depth of cut of up to 2 mm (0.079 inch) can be achieved in a single cut. The CBN insert guarantees short chips, ensuring good chip breakage and chip control. This reduces the number of machining interruptions due to chip congestion.

Features and benefits

  • Performs hard-to-soft machining of case-hardened transmission components using a one cut strategy
  • Good chip breakage and chip control
  • Reduces machining interruptions due to chip congestion
  • Maximum depth of cut 2 mm (0.079 inch)
  • Chip breaker geometry is aligned parallel to the cutting edge
  • CBN insert tip length of 3.5 mm (0.138 inch)
  • Available in four different variants

Application

  • Case-hardened steel components
  • Hard-to-soft machining where the hardened layer needs to be removed
  • Maximum depth of cut of 1.5–2 mm (0.059–0.079 inch)
  • Gears, crown wheels, shafts

Downloads Ordering code - CBN insert with integral chip breaker

Join us. Stay updated.

Sign up for our newsletter today

account_circle

Benvenuto,