Solutions for cost effective and high-quality machining of oil and gas tubing hanger features
A tubing hanger is a component used in the completion of oil and gas production wells. It is attached to the topmost tubing joint in the wellhead to support the tubing string.
The tubing hanger is typically located in the tubing head, with both components incorporating a sealing system to ensure that the tubing conduit and annulus are hydraulically isolated.
Facts and component characteristics
Material:
- Steel AISO/SAE 4130
- Inconel 625 cladding
- Solid Inconel 718
Key component features:
- External and internal turning
- External turn milling
- Roughing cross hole
Tooling solutions for machining of oil and gas – tubing hanger features
PrimeTurning™ - all directional turning with extraordinary productivity for internal and external turning applications
With the CoroTurn® Prime SL head solution it is now possible to use our PrimeTurning™ methodology for internal turning. The inside-out machining capability allows for excellent chip evacuation and chip control.
Silent Tools™ - Overcome vibrations when machining long overhangs
To keep chips flying at a high rate, it is important to reduce vibration as much as possible. Silent Tools™ dampened boring bars minimize vibrations. In this way, a high metal removal rate is possible.
CoroTurn® SL adaptor interface
CoroTurn® SL is a modular system of adaptors and cutting heads with which you can build customized tools for a variety of turning applications with a minimum amount of items. The robust coupling and many combination possibilities makes it ultimate for building a tool for machining complex components.
CoroMill® MH20
High-feed milling cutter optimized for:
- Open and closed pocket milling
- Full slotting and hole making with helical ramping cycles
- Long overhang cavity milling
- Low engagement shoulder milling
- Multi-task turn milling
Read more about CoroMill® MH20
CoroMill® 300 – Light cutting face and profile milling cutters
This is a round insert cutter for a broad range of operations such as face milling, pocketing, and profiling.
CoroBore® BR30
Three-edge rough boring tools for maximum productivity. Very productive multi-edge tool, available from three to eight cutting edges, for maximum metal removal rate.
CoroBore® 111 insert assortment
Rough boring tools
Roughing is primarily focused on metal removal and is performed to open up an existing hole made by methods such as pre-machining, casting or forging. Rough boring prepares the hole for finishing.
Click here to see our rough boring tools
Coromant Capto® is a modular quick-change tooling concept offering three systems in one. Benefits with Coromant Capto® are:
- Flexible with extensive modularity
- High basic stability and accuracy
- Minimized tool inventory
- Reduced set-up time
Coromant Capto® Plus – Predictive maintenance
With Coromant Capto® Plus you can predict the maintenance need of your driven tool holder and plan accordingly.
CoroCut® 1-2 - Versatile parting and grooving
With more than 700 standard inserts, CoroCut 1-2 covers all parting and grooving applications in most materials, from standardized grooves to parting off and profiling in heat resistant super alloys.
Customer values using tools from Sandvik Coromant
Our tooling solutions give the opportunity to reach high total productivity on two levels: metal cutting efficiency and machine utilization. Below are some key values our tools can offer:
- Increased productivity and tool life
- Secure and predictable process
- Vibration-free machining with Silent Tools™
- Good chip control thanks to cutting heads with high precision nozzle technology
- Short tool change time with quick change clamping units
- Good reach and accessibility
- Component quality - great surface finish and close tolerances
Tips film – Long overhang machining in advanced materials
Sandvik Coromant showcases solutions and services for Middle East manufacturers
Tubing hanger components are an essential element of oil and gas production wells... chevron_right
Sandvik Coromant showcases solutions and services for Middle East manufacturers
Tubing hanger components are an essential element of oil and gas production wells... chevron_right
Mandrel
A mandrel is a bar, shaft or spindle around which other components are arranged or... chevron_right
Oil Country Tubular Goods, OCTG
The most common term used for components in the oil and gas industry is OCTG. Their... chevron_right
