Time for change

Thriving in high feeds

The peak performance of CoroDrill® DE10 is achieved at high feeds and speeds, leveraging its unique geometry, high-performance grades and robust design.​

Increase your feed by 40% and watch your productivity soar and cost efficiency peak. Plus, you will reduce your CO₂ emissions per operation by approximately 20%.*​

*Recorded in reference testing.​

Get more from every drill

When paired with recommended feeds and speeds, CoroDrill® DE10 delivers unmatched tool life with an average increase of 40% or more, regardless of the material.​

Expect high, consistent quality from beginning to end and reduced cost per hole.​

Familiar design with newfound security​

The pre-tension clamping interface of CoroDrill® DE10 is just like the ones you are used to but with next-level security. This patented solution is the most robust design of its kind, ensuring:​

• Fast and easy tip changes, no spare parts needed​
• Trouble-free drilling at high feeds and speeds​
• Strength and high clamping forces ​
• Good centering capabilities leading to straighter holes and tighter tolerances​
• More drill tips per drill body​

One geometry. No compromise.

Tip geometry -M5 is one of a kind, offering uncompromised performance in all materials and a wide range of cutting data. In any other exchangeable-tip drill concept, you will need multiple geometries.​

With this one-fits-all design, CoroDrill® DE10 is easy to apply and exceptionally useful for mixed productions.​

CoroDrill® DE10 is designed for short-hole drilling between diameters 9.00–17.90 mm (0.354–0.705 inch) and drill depths 3-8 x DC across all material groups, offering a large cutting data window with high cutting parameters right from the start. The concept includes cylindrical and cylindrical with flat shank types and presents the unique benefit of a single, versatile geometry that covers all materials.